DTC C1440: Steering Angle Sensor Unusual Bank Angle Detected [12/2017 - 10/2023]: Description
If the skid control ECU assembly determines that the vehicle is being driven at a steep bank angle, the skid control ECU assembly stores DTC C1440 while VSC operation is temporarily disabled.
This is not a malfunction if the system and sensor circuits are normal and if normal VSC operation resumes.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| C1440 | Steering Angle Sensor Unusual Bank Angle Detected | 630 | Driving at a steep bank angle. | Yaw rate sensor | - |