DTC C1429: Open or Short in Brake Pedal Load Sensing Switch [12/2017 - 09/2018]: Description
The brake pedal load sensing switch signal turns on when the brake pedal is depressed with a force exceeding a predetermined level.
The skid control ECU (brake actuator assembly) uses this circuit to detect if the brake pedal is depressed or not.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C1429 | Open or Short in Brake Pedal Load Sensing Switch | When the voltage at terminal +BS is 9.5 V or higher, an open or short in the brake pedal load sensing switch continues for 0.3 seconds or more. |
|
- |