LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500h >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Hybrid Transmission System - Service Information (2 Of 2) >> Shift Lever Knob >> Installation [01/2017 - ] >> Procedure

Installation [01/2017 - ]: Procedure

  1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the shift lever knob sub-assembly.
      1. Turn the shift knob sub-assembly until rotation becomes difficult.
        GTY778748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Threaded Portion
        *b Non-threaded Portion
        Turn
        NOTE:

        When rotation becomes difficult, the shift lever assembly (shaft) has reached the non-threaded portion on the inside of the shift knob sub-assembly.

      2. From there, tighten by one turn.
      3. In addition, align shift lever knob sub-assembly to the front and rear direction of the vehicle.
scientia non olet · About LEMON Manuals