LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Combination Meter >> Removal [01/2017 - ] >> Procedure

Removal [01/2017 - ]: Procedure

  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

    Refer to PROCEDURE - Step 2 [01/2017 - 09/2018] , or refer to PROCEDURE - Step 2 [09/2018 - 05/2023] , or refer to PROCEDURE - Step 2 [05/2023 - ]

  2. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 7 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 7 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 7 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 7 [05/2023 - ]

  3. REMOVE METER HOOD SUB-ASSEMBLY 

    See step  3

  4. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 4 screws.
      GTY802669Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY832743Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction

      Detach the claws and guides as shown in the illustration.

    3. GTY802653Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Detach the wire harness clamps and disconnect the 2 connectors.

    4. GTY793995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction

      Remove the combination meter assembly as shown in the illustration.

  5. REMOVE METER HOOD SPACER 
    1. GTY810073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Detach the claws and remove the meter hood spacer.

scientia non olet · About LEMON Manuals