Installation [01/2017 - ]: Procedure

INSTALL METER HOOD SPACER

Attach the claws to install the meter hood spacer.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL COMBINATION METER ASSEMBLY

Temporarily install the combination meter assembly in the direction indicated by the arrow in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

Connect the 2 connectors and attach the wire harness clamps.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Attach the guides and claws in the direction indicated by the arrow in the illustration.

Install in this Direction

Install the combination meter assembly with the 4 screws.

INSTALL METER HOOD SUB-ASSEMBLY
Refer to PROCEDURE - Step 38 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 38 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 38 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 43 [05/2023 - ]
INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL
Refer to PROCEDURE - Step 39 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 39 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 39 [04/2020 - 05/2023] , or refer to PROCEDURE - Step 44 [05/2023 - ]
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Refer to PROCEDURE - Step 18 [01/2017 - 09/2018] , or refer to PROCEDURE - Step 18 [09/2018 - 05/2023] , or refer to PROCEDURE - Step 18 [05/2023 - ]