LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Coupe >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (Coupe) >> Rear Shock Absorber >> Disposal [03/2017 - ] >> Procedure

Disposal [03/2017 - ]: Procedure

  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH 
    1. Fully extend the front shock absorber assembly.
    2. Using a drill, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.
      WARNING:

      Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

      HINT: 

      The gas is colorless, odorless and non-poisonous.

      GTY819936Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals