LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Advanced Driver Assistance System - Service Information (Coupe)) >> Millimeter Wave Radar Sensor >> Removal [05/2023 - ] >> Procedure

Removal [05/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER ASSEMBLY 

    Refer to REMOVAL [05/2023 - ]

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    NOTE:

    Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

    1. Remove the 2 bolts and screw.
      GTY1241765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Bolt
      Screw
    2. Detach the guide and remove the millimeter wave radar sensor assembly.