DTC C13A8/44: Tension Sensor Malfunction [03/2017 - 09/2018]: Description

The tension sensor is built into the parking brake with bracket actuator assembly. It detects the tension value of the parking brake cable and outputs the value to the parking brake ECU assembly.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Memory	Note
C13A8/44	Tension Sensor Malfunction	All of following conditions are met: Engine switch is on (IG), or when engine switch is off, electric parking brake switch assembly lock control is operating. Tension sensor output value is abnormal; difference between output values of 2 tension sensors; or tension sensor power supply voltage is abnormal. Problem occurs for Approximately 1 second.	Parking brake with bracket actuator assembly Wire harness or connector Parking brake ECU assembly	Yes	An electric parking brake system malfunction is displayed on the multi-information display.