Caution / Notice / Hint
NOTE:
- This DTC may be stored when the parking brake is forcibly released, but this is not a malfunction.
- The electric parking brake may still operate up to 20 seconds after the engine switch is turned off. Before disconnecting connectors or fuses, turn the engine switch off and wait 20 seconds or more.
- Cable tension may fall below the prescribed value and C13A8/44 may be stored when the parking brake is forcibly released, but this is not a malfunction.
- If the parking brake ECU assembly or parking brake with bracket actuator assembly is replaced, perform the "Reset Memory" and "Acquire Tension Sensor Zero Point" procedures.
Refer to INITIALIZATION [03/2017 - 09/2018]