DTC C1345: Linear Solenoid Valve Offset Learning undone; DTC C1368: Linear Solenoid Valve Offset [09/2018 - ]: Description
The skid control ECU assembly stores and corrects the individual differences in the brake pedal stroke sensor assembly, actuator solenoids, and stroke simulator solenoid. Perform initialization and calibration of the linear solenoid valve if any of these parts is replaced.
These DTCs are cleared when the linear valve offset learning results are normal.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| C1345 | Linear Solenoid Valve Offset Learning undone | 501 502 503 504 |
Linear valve offset learning undone.
|
Perform linear valve offset learning and check for DTCs. If no DTCs are output again, the valve is normal. | - |
| C1368 | Linear Solenoid Valve Offset | 505 | Offset learned value out of specification. |
|
- |