DTC C1341/62: Front Hydraulic System RH Malfunction; DTC C1342/63: Front Hydraulic System LH Malfunction; DTC C1343/64: Rear Hydraulic System RH Malfunction; DTC C1344/65: Rear Hydraulic System LH Malfunction [03/2017 - 09/2018]: Description
To control the braking force for each wheel, the skid control ECU assembly inputs the operating fluid pressure of each wheel cylinder from the wheel cylinder pressure sensors.
DTCs may be stored if one of the following occurs:
- Brake fluid leaks.
- Wheel cylinder vibrates due to uneven wear of a brake disc.
- Foreign matter enters solenoid valve.
- Line pressure drops during air bleeding.
- Brake pads are replaced.
- Rotors are replaced.
HINT:
When replacing the brake pads, retracting the brake caliper pistons and installing new brake pads will greatly increase the clearance between the brake pads and brake discs. This will result in a significant possibility of this DTC being stored the next time the brake pedal is depressed. As this is not a malfunction, clear the DTC if it is stored for this reason.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| C1341/62 | Front Hydraulic System RH Malfunction | 551 552 553 554 555 |
|
|
Electronically controlled brake system DTC |
| C1342/63 | Front Hydraulic System LH Malfunction | 561 562 563 564 565 |
|
|
Electronically controlled brake system DTC |
| C1343/64 | Rear Hydraulic System RH Malfunction | 571 572 573 574 575 |
|
|
Electronically controlled brake system DTC |
| C1344/65 | Rear Hydraulic System LH Malfunction | 581 582 583 584 585 |
|
|
Electronically controlled brake system DTC |
| DTC No. | Brake warning light / yellow (minor malfunction) code | ABS warning light code | Slip indicator light code | Brake hold standby indicator light code |
|---|---|---|---|---|
| C1341 | 62 | 42 | 45 | 21 |
| C1342 | 63 | 42 | 45 | 21 |
| C1343 | 64 | 42 | 45 | 21 |
| C1344 | 65 | 42 | 45 | 21 |