LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Coupe >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (Coupe) (1 Of 4) >> Electronically Controlled Brake System >> DTC C1210/36: Zero Point Calibration of Yaw Rate Sensor Undone; DTC C1336/98: Zero Point Calibration of Acceleration Sensor Undone [03/2017 - 09/2018] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When replacing the skid control ECU assembly or yaw rate sensor, perform initialization and calibration of the linear solenoid valve.

Refer to INITIALIZATION [03/2017 - ]

HINT: 

When U0123/62 and/or U0124/95 is output together with C1210/36 and/or C1336/98, inspect and repair trouble areas indicated by U0123/62 and/or U0124/95 first.

Refer to DTC U0073/94: Control Module Communication Bus OFF; DTC U0100/65: Lost Communication with ECM / PCM; DTC U0120/96: Lost Communication with Starter / Generator Control Module; DTC U0123/62: Lost Communication with Yaw Rate Sensor Module; DTC U0124/95: Lost Communication with Lateral Acceleration Sensor Module; DTC U0126/63: Lost Communication with Steering Angle Sensor Module; DTC U0128/13: Lost Communication with Park Brake Control Module; DTC U0130/68: Lost Communication with Steering Effort Control Module; DTC U0134/15: Lost Communication with DRS Module; DTC U0151: Lost Communication with Airbag ECU [03/2017 - 09/2018]