DTC C1203: ECM Communication Circuit [09/2018 - ]: Description
The circuit is used to send TRAC and VSC information from the skid control ECU to the VGRS ECU (front steering control ECU) and DRS ECU (rear steering control ECU), variable gear ratio steering system information from the VGRS ECU (front steering control ECU) to the skid control ECU, and dynamic rear steering system information from the DRS ECU (rear steering control ECU) to the skid control ECU via the CAN communication system.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|---|
| C1203 | ECM Communication Circuit | - | Any of the following is detected: 1. The information stored in the skid control ECU assembly does not match with the information about whether or not there is a VGRS ECU (front steering control ECU). 2. The information stored in the skid control ECU assembly does not match with the information about whether or not there is a DRS ECU (rear steering control ECU). 3. An improper skid control ECU assembly is installed. 4. The skid control assembly is malfunctioning. |
|
- |