Installation [05/2023 - ]: Procedure

INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH

Slide in the installation direction shown in the illustration and attach the claw to install the seat heater control sub-assembly LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL FRONT SEAT ASSEMBLY LH
Refer to INSTALLATION [05/2023 - ]
INITIALIZATION OF SEAT ECU
Refer to PROCEDURE - Step 2
PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat)
Refer to INITIALIZATION [03/2017 - ]
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [05/2023 - ]