Installation [05/2023 - ]: Procedure

INSTALL FRONT POWER SEAT SWITCH LH

Install the front power seat switch LH to the switch bezel with the 4 screws.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL SWITCH BEZEL

Attach the claw and install the switch bezel with the 2 screws.

Install in this Direction

INSTALL SEAT ADJUSTER SHIELD CLAMP BRACKET LH
Refer to PROCEDURE - Step 52
INSTALL RECLINING POWER SEAT SWITCH KNOB
Refer to PROCEDURE - Step 53
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Refer to PROCEDURE - Step 54
INSTALL FRONT SEAT CUSHION SHIELD LH
Refer to PROCEDURE - Step 56
INSTALL FRONT SEAT ASSEMBLY LH
Refer to INSTALLATION [05/2023 - ]
INITIALIZATION OF SEAT ECU
Refer to PROCEDURE - Step 2
PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat)
Refer to INITIALIZATION [03/2017 - ]
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [05/2023 - ]