Installation [05/2023 - ]: Procedure

INSTALL POSITION CONTROL ECU ASSEMBLY

Install the position control ECU assembly with the 3 screws.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Screw
	Connector

INSTALL FRONT SEAT ASSEMBLY LH
Refer to INSTALLATION [05/2023 - ]
INITIALIZATION OF SEAT ECU
Refer to PROCEDURE - Step 2
PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat)
Refer to INITIALIZATION [03/2017 - ]
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [05/2023 - ]