LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Coupe >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Body Panels / Trim - Service Information (Coupe) (2 Of 2) >> Front Console Box >> Reassembly [05/2023 - ] >> Procedure

Reassembly [05/2023 - ]: Procedure

  1. INSTALL CONSOLE COMPARTMENT DOOR PAD SUB-ASSEMBLY 
    1. While pushing the slide knob, align the bush with the side rail and install the console compartment door pad sub-assembly in the direction of the arrow shown in the illustration.
      GTY949982Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Slide Knob
      Install in this Direction
      NOTE:

      Install the console compartment door pad sub-assembly so that its rib is not under the damper.

      GTY951686Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Correct *b Incorrect
      *c Rib *d Damper

      HINT: 

      Align the bush and side rail, and then install the bush.

      GTY950509Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Bush
      *b Side Rail
    2. Using needle-nose pliers, attach the spring.
      GTY951167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the 2 screws.
      GTY949989Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. While pushing the slide knob, move the No. 1 console compartment door lock sub-assembly in the direction of the arrow shown in the illustration.
      GTY950040Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Slide Knob
      Install in this Direction
    5. GTY951175Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Install the 2 screws.

    6. Attach the clip in the direction of the arrow shown in the illustration.
      GTY950887Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
      NOTE:

      When attaching the clip, check that a connecting sound can be heard.

    7. Attach the clip to install the No. 2 console box hole cover in the direction of the arrow shown in the illustration.
      NOTE:

      When attaching the clip, check that a connecting sound can be heard.

      GTY951902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    8. Attach the claw to install the rear upper console panel in the direction of the arrow shown in the illustration.
      GTY950154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    9. Install the 2 screws.
      GTY949992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    10. Install the 2 new No. 1 rear seat console table plugs.
      GTY951183Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY 
    1. Install the instrument panel cup holder assembly with the 4 screws.
      GTY825470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY 
    1. Install the console compartment door lock sub-assembly with the 2 screws.
      GTY1085731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 new No. 1 rear seat console table plugs.
      GTY1086071Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals