- REMOVE NO. 1 ROCKER PANEL MOULDING PROTECTOR
HINT:
When removing the No. 1 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 1 rocker panel moulding protector using a heat light.
Standard
| Item |
Temperature |
| Body Rocker Panel Moulding Assembly LH |
20 to 30°C (68 to 86°F) |
| No. 1 Rocker Panel Moulding Protector |
WARNING:
- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Heated Part |
| *b |
Heat Light |
- Remove the 2 No. 1 rocker panel moulding protectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR
HINT:
When removing the No. 2 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 2 rocker panel moulding protector using a heat light.
Standard
| Item |
Temperature |
| Body Rocker Panel Moulding Assembly LH |
20 to 30°C (68 to 86°F) |
| No. 2 Rocker Panel Moulding Protector |
WARNING:
- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Heated Part |
| *b |
Heat Light |
- Remove the 2 No. 2 rocker panel moulding protectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 6 ROCKER PANEL MOULDING PROTECTOR
HINT:
When removing the No. 6 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 6 rocker panel moulding protector using a heat light.
Standard
| Item |
Temperature |
| Body Rocker Panel Moulding Assembly LH |
20 to 30°C (68 to 86°F) |
| No. 6 Rocker Panel Moulding Protector |
WARNING:
- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Heated Part |
| *b |
Heat Light |
- Remove the No. 6 rocker panel moulding protector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 SIDE MUDGUARD PROTECTOR
HINT:
When removing the No. 2 side moulding protector, heat the body rocker panel moulding assembly LH and No. 2 side moulding protector using a heat light.
Standard
| Item |
Temperature |
| Body Rocker Panel Moulding Assembly LH |
20 to 30°C (68 to 86°F) |
| No. 2 Side Moulding Protector |
WARNING:
- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Heated Part |
| *b |
Heat Light |
- for Front Side:
- Remove the 2 No. 2 side moulding protectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- for Rear Side:
- Remove the 2 No. 2 side moulding protectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE REAR BUMPER PAD
HINT:
When removing the rear bumper pad, heat the body rocker panel moulding assembly LH and rear bumper pad using a heat light.
Standard
| Item |
Temperature |
| Body Rocker Panel Moulding Assembly LH |
20 to 30°C (68 to 86°F) |
| Rear Bumper Pad |
WARNING:
- Do not touch the heat light and heated parts.
- Touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Heated Part |
| *b |
Heat Light |
- Remove the rear bumper pad.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|