Inspection [03/2017 - ]: Procedure
- INSPECT REAR SPOILER MOTOR ASSEMBLY
- Check that the drive shaft moves smoothly when the battery is connected to the connector terminals.
*a Drive shaft *b Clockwise *c Counterclockwise *d Component without harness connected
(Rear Spoiler Motor Assembly)OK
Battery Connection Operational Direction Battery positive (+) → 3
Battery negative (-) → 1Drive shaft rotates clockwise Battery positive (+) → 1
Battery negative (-) → 3Drive shaft rotates counterclockwise HINT:
If the result is not as specified, replace the rear spoiler motor assembly.
- Check that the drive shaft moves smoothly when the battery is connected to the connector terminals.