Disassembly [03/2017 - ]: Procedure

1. Using a T30 "TORX" socket wrench, remove the 4 "TORX" screws and rear spoiler sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

When removing the rear spoiler protector LH, if the double-sided tape is difficult to remove, heat the adhesive of the rear spoiler protector LH and rear spoiler sub-assembly using a heat light.

Standard Value

WARNING:

• Do not touch the heat light and heated parts.
• Touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Remove the rear spoiler protector LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Use the same procedure described for the LH side.

HINT: 

When removing the rear spoiler No. 12 protector LH, if the double-sided tape is difficult to remove, heat the adhesive of the rear spoiler No. 12 protector LH and rear spoiler sub-assembly using a heat light.

Standard Value

WARNING:

• Do not touch the heat light and heated parts.
• Touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Remove the rear spoiler No. 12 protector LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Use the same procedure described for the LH side.

1. Detach the claws and remove the rear spoiler cover LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Use the same procedure described for the LH side.

HINT: 

When removing the rear spoiler cover, if the double-sided tape is difficult to remove, heat the adhesive of the rear spoiler cover and rear spoiler sub-assembly using a heat light.

Standard Value

WARNING:

• Do not touch the heat light and heated parts.
• Touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Remove the rear spoiler cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Double-sided Tape

   -

   -

1. Detach the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disconnect the connector and remove the connector wire.

1. Remove the 2 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

2. Detach the guide and remove the top cover lock control link sub-assembly LH.

HINT: 

Use the same procedure described for the LH side.

1. Remove the 4 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Remove in this Direction (1)
   	Remove in this Direction (2)

2. Detach the guide as shown in the illustration and remove the rear spoiler drive gear sub-assembly from the rear spoiler insert.

1. Remove the 4 screws and spindle assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using a T25 "TORX" socket wrench, remove the 3 "TORX" screws and rear spoiler motor assembly from the rear spoiler motor bracket.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002