LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats - Service Information (Coupe) (1 Of 2) >> Rear Seat Assembly >> Disassembly [09/2018 - ] >> Procedure

Disassembly [09/2018 - ]: Procedure

  1. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH 
    1. Remove the 18 hog rings.
      GTY824575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a thin-bladed screwdriver, detach the hooks and remove the separate type rear seatback cover LH from the separate type rear seatback pad LH.

      HINT: 

      Tape the thin-bladed screwdriver tip before use.

      GTY788414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape - -
  2. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH 

    HINT: 

    Use the same procedure described for the LH side.

  3. REMOVE SEAT COVER WIRE 

    HINT: 

    Use the same procedure for the other side.

    1. Remove the 4 seat cover wires.
      GTY824574Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE BENCH TYPE REAR SEAT CUSHION COVER 
    1. Remove the 40 hog rings.
      GTY811619Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pass the 2 pieces of strap through to the front side via the hole in the seat cushion pad as shown in the illustration.
      GTY830320Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    3. Using a thin-bladed screwdriver, detach the hooks and remove the bench type rear seat cushion cover from the bench type rear seat cushion pad.

      HINT: 

      Tape the thin-bladed screwdriver tip before use.

      GTY815913Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape - -
  5. REMOVE SEAT COVER WIRE 

    HINT: 

    Use the same procedure for the other side.

    1. Remove the 8 seat cover wires.
      GTY787720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals