DTC B2414: Steering Position Sensor Malfunction [03/2017 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [03/2017 - 05/2023] , or refer to DTC CHECK / CLEAR [05/2023 - ]

   Body Electrical > HL AutoLeveling > Clear DTCs 

2. Turn the engine switch on (IG) and wait for at least 10 seconds or more.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [03/2017 - 05/2023] , or refer to DTC CHECK / CLEAR [05/2023 - ]

   Body Electrical > HL AutoLeveling > Trouble Codes 

   OK

   DTC B2414 is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - 04/2020]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2020 - 05/2023]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [05/2023 - ] 

Result: 

NG 

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - 09/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - ]