| Center Airbag Sensor Communication Stop Mode |
Any of the following conditions are met:
- Communication stop for "Airbag" is indicated on the "Communication Bus Check" screen of the Techstream.
Refer to PROBLEM SYMPTOMS TABLE [05/2023 - ]
- Communication stop history for "Airbag" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Airbag" is 6 or more.)
Refer to PROBLEM SYMPTOMS TABLE [05/2023 - ]
- Communication system DTCs (DTCs that start with U) that correspond to "Center Airbag Sensor Communication Stop Mode" in "DTC Combination Table" are output.
Refer to DTC COMBINATION TABLE [05/2023 - ]
|
- Airbag ECU assembly branch wire or connector
- Power source circuit of airbag ECU assembly
- Airbag ECU assembly ground circuit
- Airbag ECU assembly
|