LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LC 500 2D Convertible >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System - Service Information (Convertible) (1 Of 2) >> Front Passenger Airbag Assembly >> Installation [07/2020 - 05/2023] >> Procedure

Installation [07/2020 - 05/2023]: Procedure

  1. INSTALL NO. 3 INSTRUMENT PANEL WIRE 
    1. Attach the wire harness clamp and install the No. 3 instrument panel wire.
      GTY953357Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the 2 airbag connectors.
      NOTE:
      • When connecting any airbag connector, take care not to damage the airbag wire harness.
      • Be sure to connect the connectors to each corresponding color.

      HINT: 

      Refer to How to Connect or Disconnect Airbag Connector:

      Refer to HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR [07/2020 - 05/2023]

  2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY 
    1. GTY813686Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Attach the hook.

    2. Push in the instrument panel passenger airbag assembly to attach the hook.
    3. Install the instrument panel passenger airbag assembly with the 2 screws.
      GTY835729Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 3 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 16

  4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to INSTALLATION [07/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - 05/2023]

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Refer to INSTALLATION [07/2020 - 05/2023]

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [07/2020 - 05/2023]

  6. PERFORM DIAGNOSTIC SYSTEM CHECK 

    Refer to DTC CHECK / CLEAR [07/2020 - ]

  7. CHECK SRS WARNING LIGHT 

    Refer to OPERATION CHECK [07/2020 - ]

scientia non olet · About LEMON Manuals