Removal [05/2023 - ]: Procedure

PRECAUTION
NOTE:
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Refer to BEFORE DISCONNECTING BATTERY [05/2023 - ]
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Refer to REMOVAL [05/2023 - ]
REMOVE OIL COOLER ASSEMBLY
Refer to REMOVAL [05/2023 - ]
REMOVE FAN AND GENERATOR V BELT
Refer to REMOVAL [07/2020 - ]

REMOVE FRONT STABILIZER BAR BRACKET BOLT

Remove the bolt and specer nut from the front frame crossmember sub-assembly.

GTY795503

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE GENERATOR ASSEMBLY

Detach the 2 clamps.

GTY831773

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the bolt and disconnect the engine wire.

Remove the terminal cap.

GTY790231

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	Terminal Cap
*2	Oil Cooler Tube
*a	Bolt
*b	Nut

Detach the clamp.
Remove the nut and disconnect the engine wire from terminal B.
Disconnect the generator assembly connector.
Remove the bolt and disconnect the oil cooler tube.

Remove the bolt and oil cooler bracket.

GTY795504

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the bolt A and engine wire bracket.

GTY838116

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	Engine Wire Bracket

Remove the bolt B and 2 nuts.

Using an E8 "TORX" socket wrench, remove the 2 stud bolts and generator assembly.

GTY795489

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the bolt and wire harness bracket from the generator assembly.