Removal [07/2020 - ]: Procedure

REMOVE SYMBOL EMBLEM

HINT:

When removing the symbol emblem, if the double-sided tape is difficult to remove, heat the adhesive of the symbol emblem and luggage compartment door panel using a heat light.

Standard Value

Part	Temperature
Luggage Compartment Door Panel	40 to 60°C (104 to 140°F)
Symbol Emblem	20 to 30°C (68 to 86°F)

WARNING:

Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

NOTE:

Do not heat symbol emblem excessively.

Put protective tape around the symbol emblem.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Wooden Block
*b	Boss Position
	Protective Tape

Insert piano wire between the luggage compartment door panel and symbol emblem.
HINT:

Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the luggage compartment door panel.
NOTE:
Be careful not to damage the luggage compartment door panel.
Remove the symbol emblem.

REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

HINT:

When removing the No. 3 luggage compartment door plate, if the double-sided tape is difficult to remove, heat the adhesive of the No. 3 luggage compartment door plate and rear bumper cover using a heat light.

Standard Value

Part	Temperature
Rear Bumper Cover	20 to 30°C (68 to 86°F)
No. 3 Luggage Compartment Door Plate	20 to 30°C (68 to 86°F)

WARNING:

Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.

*a	Heated Part
*b	Heat Light

NOTE:

Do not heat No. 3 luggage compartment door plate excessively.

Put protective tape around the No. 3 luggage compartment door plate.

*a	Wooden Block
	Protective Tape

Insert piano wire between the rear bumper cover and No. 3 luggage compartment door plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 3 luggage compartment door plate to the rear bumper cover.
NOTE:
Be careful not to damage the rear bumper cover.
Remove the No. 3 luggage compartment door plate.