Installation [05/2023 - ]: Procedure

INSTALL NO. 1 SPEAKER MOUNTING BRACKET (for Seatback)

Attach the guide to temporarily install the No. 1 speaker mounting bracket.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install the No. 1 speaker mouting bracket with the 4 bolts.
Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)

INSTALL ROOM PARTITION PANEL INSULATOR (for Seatback)

Install the room partition panel insulator with the 4 clips.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL NO. 3 SPEAKER ASSEMBLY WITH BOX (for Seatback)

for 12 Speakers:

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Bolt
	Connector

Connect the connector.
Install the No. 3 speaker assembly with box with the 4 bolts in the order shown in the illustration.
Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)

for 13 Speakers:

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Bolt
	Connector

Connect the connector.
Install the No. 3 speaker assembly with box with the 4 bolts in the order shown in the illustration.
Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)

INSTALL REAR SEAT SIDE GARNISH (for Seatback)

Move the rear seat side garnish in the direction of the arrow shown in the illustration and insert it attach the guide.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Install in this Direction (1)
	Install in this Direction (2)

Align and attach the clip to install the rear seat side garnish as shown in the illustration.

INSTALL REAR SPEAKER ASSEMBLY (for Headrest)

HINT:

Use the same procedure for the opposite side.

Connect the connector.

Attach the guide to install the rear speaker assembly with the 2 bolts.