Caution / Notice / Hint
NOTE:
- If the vehicle speed is outside the allowable range when tested, perform the operation check.
Refer to OPERATION CHECK [07/2020 - 11/2021] , or refer to OPERATION CHECK [11/2021 - ]
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
HINT:
- Before starting the following inspection, check tire size and tire air pressure.
- Factors that affect the indicated vehicle speed include the tire size, tire inflation, and tire wear. The speed indicated on the speedometer has an allowable margin of error. This can be tested using the Techstream. For details about testing and the margin of error, see the reference chart.
Refer to OPERATION CHECK [07/2020 - 11/2021] , or refer to OPERATION CHECK [11/2021 - ]
- If the vehicle speed sensor circuit has a malfunction, the skid control ECU assembly stores DTCs. Troubleshoot the electronically controlled brake system.