On-Vehicle Inspection [08/2015 - ]: Procedure

INSPECT HEIGHT CONTROL INDICATOR

Turn the engine switch on (IG) and check the height control indicator on the combination meter.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

After the height control indicator (shown in the illustration) is displayed for approximately 2 seconds, the actual vehicle height is indicated by the height control mode indicator.

INSPECT VEHICLE HEIGHT SELECTION

HINT:

Perform this inspection with the vehicle unloaded.

Start the engine.

Using the height control switch, check the vehicle height adjustment amount and vehicle height adjustment time for each vehicle height mode.

HINT:

The select mode light of the height control indicator blinks during vehicle height adjustment and remains on after the vehicle height adjustment is completed.

Standard

Mode Transition	Operation Details	Vehicle Height Adjustment Time
N mode to HI mode	From when "up" on height control switch pressed and control begins to when vehicle height is adjusted to HI mode	Approximately 20 seconds
HI mode to N mode	From when "down" on height control switch pressed and control begins to when vehicle height is adjusted to N mode	Approximately 20 seconds
N mode to LO mode	From when "down" on height control switch pressed and control begins to when vehicle height is adjusted to LO mode	Approximately 20 seconds
LO mode to N mode	From when "up" on height control switch pressed and control begins to when vehicle height is adjusted to N mode	Approximately 20 seconds

INSPECT AUTO-LEVELING FUNCTION
1. Unload the vehicle.
2. Start the engine.
3. Select N mode.
4. Check that the N mode light blinks and then remains on.
  HINT:
  
  The selected mode light on the height control indicator blinks while the vehicle height is changing and remains on when the target height is obtained.
5. Turn the engine switch off and wait for 60 seconds or more.
  HINT:
  
  The auto-leveling function is only able to lower the vehicle for 60 seconds after the engine switch is turned off.
6. Load the vehicle with 4 people (2 in the front seats and 2 in the rear seats).
  HINT:
  
  Each person should weigh approximately 55 kg (121.3 lbs).
7. Start the engine and inspect the vehicle height adjustment time.
  Standard time
  
  Approximately 20 seconds
8. With the engine running, wait for 60 seconds to discharge compressed air from the pneumatic cylinder assembly.
9. Turn the engine switch off and wait for 60 seconds or more.
  HINT:
  
  The auto-leveling function is only able to lower the vehicle for 60 seconds after the engine switch is turned off.
10. Unload the vehicle.
11. Start the engine and inspect the vehicle height adjustment time.
  Standard time
  
  Approximately 20 seconds