DTC C1762: Continuous Current to Exhaust Solenoid [08/2021 - ]: Description

The exhaust solenoid valve built into the height control compressor assembly opens to discharge compressed air from the pneumatic cylinders into the atmosphere according to the signal from the suspension control ECU.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Warning Indicate	Note
C1762	Continuous Current to Exhaust Solenoid	With the exhaust solenoid valve activated, the vehicle height is not lowered to the standard vehicle height after 100 seconds have elapsed.	Air leakage from air tube or each valve No. 2 Height control valve assembly Exhaust solenoid valve (Height control compressor assembly) Harness or connector Suspension control ECU	Not indicated	The system may store DTC C1762 even when the system is normal if one of the following occurs: 1) the vehicle is being driven or is stopped on an irregular surface; or 2) the air tubes are clogged with snow or are frozen. If DTC C1762 is stored, vehicle height control stops. However, if the engine switch is turned off and then on (IG), vehicle height control starts.