DTC B2452: Height Control Sensor Data Out of Range When Initializing [08/2015 - 08/2019]: Procedure

1. Perform initialization of the headlight swivel ECU (Refer to INITIALIZATION [08/2015 - 08/2019] ).

   HINT: 

   • Before initializing, make sure that the vehicle condition is proper for initialization.
   • Be sure to perform the initialization as instructed.

Result: 

NEXT 

See step  2

1. Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] ).
   RESULT
   
   

   Result	Proceed to
   DTC B2452 is not output	A
   DTC B2452 is output	B

   HINT: 

   If the headlight swivel ECU stores DTC B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight swivel ECU.

Result: 

A 

END 

Result: 

B 

REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2019] )