DTC B2450: Initialization has not been Performed [08/2015 - 08/2019]: Procedure

1. Perform initialization of the headlight swivel ECU (Refer to INITIALIZATION [08/2015 - 08/2019] ).

Result: 

NEXT 

See step  2

1. Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] ).
   RESULT
   
   

   Result	Proceed to
   DTC B2450 is not output	A
   DTC B2450 is output	B

   HINT: 

   If the headlight swivel ECU stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight swivel ECU.

Result: 

A 

END 

Result: 

B 

REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY 

(Refer to REMOVAL [08/2015 - 08/2019] )