LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 350 Luxury >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Engine Starting System (2GR-FKS) - Service Information >> Starter >> Installation [06/2018 - ] >> Procedure

Installation [06/2018 - ]: Procedure

  1. INSTALL STARTER ASSEMBLY 
    1. Install the starter assembly with the 2 bolts.

      Torque: 46 N.m (469 kgf/cm, 34 ft.lbf) 

    2. Connect the engine wire to the terminal 30 with the nut.

      Torque: 9.8 N.m (100 kgf/cm, 87 in.lbf) 

    3. Close the terminal cap.
    4. Connect the starter assembly connector.
  2. INSTALL BATTERY CLAMP SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 41

  3. INSTALL ECM 

    Refer to PROCEDURE - Step 3

  4. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE 

    Refer to PROCEDURE - Step 45

  5. INSTALL INLET AIR CLEANER ASSEMBLY 

    Refer to PROCEDURE - Step 46

  6. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 47

  7. INSTALL COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 2 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 2 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 2 [09/2022 - ]

  8. INSTALL BATTERY 

    Refer to INSTALLATION [06/2018 - ]

scientia non olet · About LEMON Manuals