Removal [06/2018 - ]: Procedure
- REMOVE REAR LIGHT ASSEMBLY LH
Refer to REMOVAL [06/2018 - ]
- REMOVE REAR LIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
- Remove the 2 screws.
- Remove the 6 nuts.
- Apply protective tape around the luggage compartment door outside garnish sub-assembly.
Protective Tape - Disengage the 2 clips and remove the luggage compartment door outside garnish sub-assembly as shown in the illustration.
Remove in this Direction - When reusing the luggage compartment door outside garnish sub-assembly:
- Remove the 2 clips from the luggage compartment door outside garnish sub-assembly.
- Remove the 2 screws.