Terminals Of Ecu [10/2019 - 09/2022]
- CHECK DCM (TELEMATICS TRANSCEIVER)
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition G128-1 (+B) - G128-20 (E) BR - W-B Power source (+B) Always 11 to 14 V G128-3 (SIG-) - G128-20 (E) B - W-B Ground Always Below 1 V G128-4 (IND1) - G128-20 (E) LG - W-B Manual (SOS) switch red indicator illumination signal For 2 seconds after turning the engine switch on (IG) 1 to 8.5 V Engine switch off Below 1 V G128-5 (MCVD) - G128-20 (E) B - W-B Telephone microphone assembly power supply Engine switch on (ACC) 4 to 6 V Engine switch off Below 1 V G128-6 (MCI+) - G128-20 (E) W - W-B Receive microphone voice signal Voice being input to telephone microphone assembly A waveform synchronized with microphone voice signal is input G128-7 (MCI-) - G128-20 (E) R - W-B Receive microphone voice signal Always Below 1 V G128-13 (GSW) - G128-20 (E) Y - W-B Collision detection signal Engine switch on (IG) Pulse generation (Refer to waveform1) G128-19 (IG2) - G128-20 (E) P - W-B Power source (IG) Engine switch on (IG) 11 to 14 V Engine switch off Below 1 V G128-20 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω G128-21 (SIG1) - G128-3 (SIG-) R - G Manual (SOS) switch button condition signal Manual (SOS) switch not pressed 1.3 to 1.9 V Manual (SOS) switch pressed 0.5 to 0.8 V G128-22 (IND2) - G128-20 (E) G - W-B Manual (SOS) switch green indicator illumination signal For 2 seconds after turning the engine switch on (IG) 1 to 8.5 V Engine switch off Below 1 V G128-23 (SGND) - G128-20 (E) Shielded - W-B Shield ground Always Below 1 Ω G128-25 (CANP) R CAN communication signal - - G128-26 (CANN) W CAN communication signal - - - CHECK RADIO RECEIVER ASSEMBLY
w/o Navigation System: Refer to TERMINALS OF ECU [06/2018 - 08/2021] , or refer to TERMINALS OF ECU [08/2021 - 09/2022]
w/ Navigation System: Refer to TERMINALS OF ECU [06/2018 - 08/2021] , or refer to TERMINALS OF ECU [08/2021 - 09/2022]