DTC U1000: CAN Communication Failure (Message Registry) [06/2018 - 09/2022]: Procedure

1. Clear the DTCs.

   Chassis > Rear Camera > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Chassis > Rear Camera > Trouble Codes 

   HINT: 

   • If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary CAN malfunction.
   • If DTC U1000 is stored frequently but is not output when rechecking for DTCs, attempt to reproduce the conditions when the malfunction occurred.

     Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]

   Result

   Result	Proceed to
   DTC U1000 is output	A
   DTC U1000 is not output	B

Result: 

A 

REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [06/2018 - 09/2022] 

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]