DTC C1626: Steering Angle Sensor Failure [06/2018 - 09/2022]: Procedure

1. Clear the DTCs.

   Chassis > Rear Camera > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Chassis > Rear Camera > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1626 is output	A
   DTC C1626 is not output	B

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

Result: 

A 

See step  2

1. Replace the steering sensor with a new or known good one.

   Refer to REMOVAL [06/2018 - 08/2021] , or refer to REMOVAL [08/2021 - 09/2022]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Clear the DTCs.

   Chassis > Rear Camera > Clear DTCs 

2. Recheck for DTCs and check that no DTCs are output.

   Chassis > Rear Camera > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1626 is output	A
   DTC C1626 is not output	B

Result: 

A 

REPLACE REAR TELEVISION CAMERA ASSEMBLY. Refer to  REMOVAL [06/2018 - 09/2022] 

Result: 

B 

END