DTC C2A6B: Side Camera LH Response Malfunction [06/2018 - 09/2022]: Procedure

1. Clear the DTCs.

   Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

2. Check for DTCs.

   Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

   OK

   DTC C2A6B is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ] 

Result: 

NG 

See step  2

1. Replace the side television camera assembly LH with a new or normally functioning one.

   Refer to REMOVAL [06/2018 - 09/2022]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Clear the DTCs.

   Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

2. Check for DTCs.

   Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

   OK

   DTC C2A6B is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (SIDE TELEVISION CAMERA ASSEMBLY LH IS DEFECTIVE) 

Result: 

NG 

REPLACE PARKING ASSIST ECU. Refer to  REMOVAL [06/2018 - 09/2022]