LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 300h Luxury >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System (For Nickel Metal Hydride Battery) - Diagnostic Codes (5 Of 5) & Circuit Tests (1 Of 2) >> HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY) >> DTC P3107-64: Lost Communication with Airbag System Control Module Signal Plausibility Failure [06/2018 - ] >> Procedure

DTC P3107-64: Lost Communication with Airbag System Control Module Signal Plausibility Failure [06/2018 - ]: Procedure

  1. CHECK DTC OUTPUT (SRS AIRBAG) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Body Electrical / SRS Airbag / Trouble Codes.
    4. Check for DTCs.

      Body Electrical > SRS Airbag > Trouble Codes 

      Result

      Result  Proceed to
      Airbag system DTCs are not output. A
      Airbag system DTCs are output. B
    5. Turn the power switch off.

    Result: 

    B 

    GO TO DTC CHART (AIRBAG SYSTEM (for HV Model)). Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2018 - 08/2021]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2021 - 09/2022]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2022 - ] 

    Result: 

    A 

    See step  2

  2. CLEAR DTC 

    Refer to PROCEDURE - Step 3

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  3

  3. CHECK DTC OUTPUT (HYBRID CONTROL) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
    4. Check for DTCs.

      Powertrain > Hybrid Control > Trouble Codes 

      Result

      Result  Proceed to
      P3107-64 is not output. A
      P3107-64 is output again. B
    5. Turn the power switch off.

    Result: 

    B 

    See step  5

    Result: 

    A 

    See step  4

  4. CHECK FOR INTERMITTENT PROBLEMS 

    Refer to CHECK FOR INTERMITTENT PROBLEMS [06/2018 - ]

    Result

    Proceed to
    OK
    NG

    Result: 

    OK 

    REPLACE AIR BAG ECU ASSEMBLY. Refer to  REMOVAL [06/2018 - 08/2020]  , or refer to  REMOVAL [08/2020 - 08/2021]  , or refer to  REMOVAL [08/2021 - 09/2022]  , or refer to  REMOVAL [09/2022 - ] 

    Result: 

    NG 

    REPAIR OR REPLACE MALFUNCTIONING PARTS, COMPONENT AND AREA 

  5. CHECK AIR BAG ECU ASSEMBLY (CHECK WAVEFORM) 

    See step  2

    Result

    Result  Proceed to
    The waveform appears as shown in the illustration. A
    The waveform differs from the one shown in the illustration. B

    Result: 

    A 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [06/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - 09/2022]  , or refer to  REMOVAL [09/2022 - ] 

    Result: 

    B 

    See step  6

  6. CHECK CONNECTOR CONNECTION CONDITION (HYBRID VEHICLE CONTROL ECU CONNECTOR) 

    Refer to PROCEDURE - Step 1

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    CONNECT SECURELY 

    Result: 

    OK 

    See step  7

  7. CHECK CONNECTOR CONNECTION CONDITION (AIRBAG ECU ASSEMBLY CONNECTOR) 

    See step  7

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    CONNECT SECURELY 

    Result: 

    OK 

    See step  8

  8. CHECK HARNESS AND CONNECTOR (HYBRID VEHICLE CONTROL ECU - AIRBAG ECU ASSEMBLY) 

    See step  8

    Result

    Proceed to
    OK
    NG

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR 

    Result: 

    OK 

    See step  9

  9. CHECK HARNESS AND CONNECTOR (AIRBAG ECU ASSEMBLY - BODY GROUND) 

    See step  10

    Result

    Proceed to
    OK
    NG

    Result: 

    OK 

    REPLACE AIR BAG ECU ASSEMBLY. Refer to  REMOVAL [06/2018 - 08/2020]  , or refer to  REMOVAL [08/2020 - 08/2021]  , or refer to  REMOVAL [08/2021 - 09/2022]  , or refer to  REMOVAL [09/2022 - ] 

    Result: 

    NG 

    REPAIR OR REPLACE HARNESS OR CONNECTOR 

scientia non olet · About LEMON Manuals