LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 300h Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Engine Lubrication System (2GR-FKS) - Service Information) >> Oil Pressure Switch >> Removal [06/2018 - ] >> Procedure

Removal [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 13 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 13 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 13 [09/2022 - ]

  2. DRAIN ENGINE OIL 

    Refer to PROCEDURE - Step 5 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 5 [08/2021 - ]

  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disengage the clamp to disconnect the wire harness protector.
      GTY765569Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Wire Harness Protector
    2. Disconnect the engine oil pressure switch assembly connector.
    3. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
      GTY761250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals