DTC C1434: Steering Angle Sensor Output [06/2018 - ]: Description
Steering angle sensor signals are input to the skid control ECU (brake booster with master cylinder assembly) via the CAN communication system.
HINT:
When a malfunction occurs in the communication line to the steering angle sensor, U0126 (Lost Communication With Steering Angle Sensor Module) is output.
If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.
DTCs may be stored if one of the following occurs:
- Steering angle sensor zero point malfunction.
- Steering angle sensor signal malfunction.
- Steering angle sensor installation abnormality.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C1434 | Steering Angle Sensor Output | 701 | When communication is normal, a steering angle sensor malfunction is detected. |
|
Does not come on | VSC DTC |