LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 300h Luxury >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (1 Of 2) >> Grille Shutter >> Disassembly [06/2018 - 08/2021] >> Procedure

Disassembly [06/2018 - 08/2021]: Procedure

  1. REMOVE MOTOR COVER 
    1. Disconnect the connector.
      GTY835771Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 clamps.
    3. Disengage the 4 claws to remove the motor cover as shown in the illustration.
      GTY799244Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  2. REMOVE SWING GRILLE ACTUATOR ASSEMBLY 
    1. Remove the swing grille actuator assembly as shown in the illustration.
      GTY792435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  3. REMOVE NO. 3 RADIATOR GRILLE SEAL 
    1. Remove the No. 3 radiator grille seal.
      GTY835739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the same procedure for the RH side and LH side.

  4. REMOVE NO. 1 RADIATOR GRILLE SEAL 
    1. Remove the No. 1 radiator grille seal.
      GTY813872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE NO. 2 RADIATOR GRILLE SEAL 
    1. Remove the No. 2 radiator grille seal.
      GTY813858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals