LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 250 Luxury >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (A25A-FKS) - Service Information >> Purge Valve >> Installation [08/2020 - ] >> Procedure

Installation [08/2020 - ]: Procedure

  1. INSTALL PURGE VALVE (PURGE VSV) 
    1. Install the purge valve (purge VSV) to the purge VSV bracket with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      GTY947903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 1 Fuel Vapor Feed Hose
      *2 No. 2 Fuel Vapor Feed Hose
      *a Up
      *b Front
      *c 120°
      *d 2 to 7 mm (0.0787 to 0.276 in.)
    2. Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).
    3. Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

      HINT: 

      Engage the clip within the area shown in the illustration.

    4. Connect the purge valve (purge VSV) connector.
scientia non olet · About LEMON Manuals