LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 250 Luxury >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery / Charging System (A25A-FKS) - Service Information >> Generator >> Removal [09/2022 - ] >> Procedure

Removal [09/2022 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 1

  3. REMOVE INLET AIR CLEANER ASSEMBLY 

    Refer to PROCEDURE - Step 21

  4. REMOVE V-RIBBED BELT 

    Refer to REMOVAL [08/2020 - ]

  5. REMOVE GENERATOR ASSEMBLY 
    1. Disconnect the generator assembly connector.
      GTY947151Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Open the terminal cap.
    3. Remove the nut and disconnect the wire harness from terminal B.
    4. Remove the bolt and separate the wire harness clamp bracket from the generator assembly.
    5. Disconnect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.
    6. Disengage the clamp.
    7. Remove the 2 nuts, bolt and generator assembly.
      GTY947152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals