Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF [06/2018 - ]: Procedure

1. Check that the AUTO function operates when the operating conditions are met.

   HINT: 

   Do not use the multi-information display to determine whether the AUTO function is operating or not.

   Result

   Result	Proceed to
   The AUTO function operates	A
   The AUTO function does not operate	B

Result: 

A 

REPLACE COMBINATION METER ASSEMBLY. Refer to  REMOVAL [06/2018 - 08/2021]  , or refer to  REMOVAL [08/2021 - ] 

Result: 

B 

GO TO Electric Parking Brake System AUTO Function Circuit. Refer to  Electric Parking Brake System AUTO Function Circuit [06/2018 - 08/2020]  , or refer to  Electric Parking Brake System AUTO Function Circuit [08/2020 - ]