Removal [08/2020 - 08/2021]: Procedure

PRECAUTION
NOTE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
REMOVE BATTERY
for A25A-FKS: Refer to REMOVAL [08/2020 - 08/2021]

for 2GR-FKS: Refer to REMOVAL [06/2018 - 08/2021]

REMOVE VACUUM WARNING SWITCH ASSEMBLY

Disconnect the connector from the vacuum warning switch assembly.

GTY766382

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the vacuum warning switch assembly from the brake booster assembly.

REMOVE CHECK VALVE GROMMET
1. Remove the check valve grommet from the brake booster assembly.