Removal [08/2020 - 09/2022]: Procedure

Refer to REMOVAL [08/2020 - 09/2022] 

1. Using SST, remove the rear No. 1 differential mount cushion.
   • SST: 09316-12010 
   • SST: 09570-24011 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Rear Suspension Member Sub-assembly	-	-
   *a	Turn	*b	Hold
   	Turning Direction		Front of Vehicle
   	SST Bolt Position	-	-

   NOTE:

   • Do not bring SST into contact with the rear suspension member sub-assembly.
   • Before using SST, apply grease to SST bolt.
   • Set SST in the correct direction.
   • Do not tilt the SST bolt.
   • Do not reuse the rear No. 1 differential mount cushion.