LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 250 F Sport >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information (2 Of 2) >> VACUUM PUMP (for TMC Made 2GR-FKS) >> Removal [06/2018 - 08/2021] >> Procedure

Removal [06/2018 - 08/2021]: Procedure

  1. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY 

    Refer to REMOVAL [06/2018 - ]

  2. REMOVE NO. 2 SURGE TANK STAY 

    Refer to PROCEDURE - Step 10

  3. SEPARATE ENGINE WIRE 
    1. Remove the 2 bolts and separate the engine wire.
      GTY768992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and separate the earth wire.
      GTY742535Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. DISCONNECT AIR TUBE 
    1. Slide the clip and disconnect the air tube from the vacuum pump assembly.
      GTY742534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE VACUUM PUMP ASSEMBLY 
    1. Remove the 3 bolts and vacuum pump assembly from the engine assembly.
      GTY742537Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the No. 2 O-ring and No. 3 O-ring from the vacuum pump assembly.
      GTY653912Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 2 O-ring
      *2 No. 3 O-ring
scientia non olet · About LEMON Manuals