LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> ES 250 Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Antenna >> Removal [08/2021 - 09/2022] >> Procedure

Removal [08/2021 - 09/2022]: Procedure

  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to REMOVAL [08/2021 - 09/2022]

  2. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 1

  3. REMOVE DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 2

  4. REMOVE NO. 3 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 4

  5. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET 
    1. Disconnect the connector.
      GTY789344Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws.
    3. Remove the 2 screws and navigation antenna assembly with bracket.
      GTY789343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE NAVIGATION ANTENNA ASSEMBLY 
    1. Disengage the 2 claws and 6 guides to remove the navigation antenna assembly as shown in the illustration.
      GTY809169Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  7. REMOVE NAVIGATION ANTENNA BRACKET 
scientia non olet · About LEMON Manuals