LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 250h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Continuously Variable Transaxle (CVT) System (K120) (Service Information) (2 Of 2)) >> Shift Lever Knob >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

WARNING: This page is about a different car, the 2022 Lexus UX 200, 2021 Lexus UX 200, 2020 Lexus UX 200, and 2019 Lexus UX 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.
      GTY806543Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.
      GTY790159Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clip
      *b Protective Tape
      Remove in this Direction
      NOTE:

      Be careful not to damage the shift lever knob sub-assembly.

scientia non olet · About LEMON Manuals